manualshive.com logo in svg

Canon EOS D60, Service Manual

Share
Download
Canon EOS D60 Service Manual Download Page 129

1.11 SPC Positioning Adjustment

The SPC positioning adjustment can be done with or without the adjustment

software. If you do not use the software, you will need a small flashlight and very
refined servicing skills. The procedure without the adjustment software is
explained below.

<Required tools>

Bright penlight
Normal EF 50mm f/1.8 lens
Aron Alpha

<Preparation>

1) Attach the EF 50mm f/1.8 lens to the camera.
2) Cover the viewfinder with your hand matching the AF centering range.

Illuminate the side (the clear portion) of the SPC with the flashlight.

3) Look through the lens, and move the flashlight so that you can see the SPC's

S0 and the border lines. It would be best if you cover the viewfinder so that the
AF point at the center looks dim. Also, if the flashlight is fixed in place, it will
be easier to move the SPC.

<Adjustment Procedure>

1) Move the SPC so that the SPC's S0 is aligned with the AF point at the center of

the viewfinder.

2) Do fine adjustments so that the left and right AF points are centered as well.

Part 4: Electrical Adjustments

4-19

S0

Center of the viewfinder

Summary of Contents for EOS D60




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands