manualshive.com logo in svg

Canon EOS D60, Service Manual

Share
Download
Canon EOS D60 Service Manual Download Page 112

1.2 Installation Procedure

The TWAIN driver from EOS DIGITAL SOLUTION DISK must be installed.

Supplied software:

•

Adjustment software: EOS_D60.exe

•

Defragmentation program: EOSD60_Defrag.exe

•

CMOS scratch data update program: EOSD60_Compiler.exe

Software to be procured locally:

•

Internet Explorer 4 or higher

•

EOS D60, TWAIN driver (EOS DIGITAL SOLUTION DISK )

Installation procedure:
Adjustment software installation

1) Install Internet Explorer 4 or higher. 
2) Install TWAIN driver (EOS DIGITAL SOLUTION DISK).

* Before installing the adjustment software, make sure it works.

3) Install the adjustment software.
4) Install the CMOS scratch data update program.
5) Re compression the defragmentation program.

Uninstall procedure:
Adjustment software uninstall procedure

1) Move the holder containing the CMOS scratch data update program

(EOSD60_Compiler.exe) to the trash bin.

2) Move the holder containing the adjustment software (EOS_D60.exe) to the

trash bin.

3) Uninstall the TWAIN driver. (See manual.)

Part 4: Electrical Adjustments

4-2

Summary of Contents for EOS D60




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands