manualshive.com logo in svg

Canon EOS D60, Service Manual

Share
Download
Canon EOS D60 Service Manual Download Page 3

Technical Documents

Application

This CD-ROM is issued by Canon Inc. for qualified persons to learn technical theory and
product repair. This CD-ROM covers all localities where the products are sold. For this
reason, there may be information in this CD-ROM that does not apply to the product sold in
your locality.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.

Trademarks

The product names and company names described in this CD-ROM are the registered
trademarks of the individual companies.

Copyright

Canon Inc. retains the copyright to all data contained on this CD-ROM.
Reproduction, publication (including on the World Wide Web) alteration, translation into
another language, or other use of the data in whole or part, contained on this CD-ROM
without the written consent of Canon Inc., is prohibited.

PDF Files

This CD-ROM contains PDF files created using Adobe

®

Acrobat

®

4.0J. PDF files can be

viewed using Adobe

®

Acrobat

®

Reader 4.0 or later.

Copyright © 2002 Canon Inc.

First published April, 2002

Summary of Contents for EOS D60




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands