Canon EOS D60, Service Manual

Page: 24 / 211

Part 1: General Information
1-14
9. Exposure Control
9-1 Type: TTL full aperture metering with 35-zone SPC. Three
metering modes provided:
1) Evaluative metering
2) Partial metering at center (approx. 9.5% of
viewfinder)
3) Centerweighted average metering
* In Full Auto and Programmed Image Control modes: 1)
is set automatically.
* (2) and 3) cannot be set.)
* In the Creative Zone modes, 1), 2), or 3) can be set.
9-2 Shooting modes: The following AE modes and manual can be set:
1) Intelligent Program AE (shiftable)
2) Shutter-priority AE (No safety shift)
3) Aperture-priority AE (No safety shift)
4) Depth-of-field AE (A-DEP, shiftable)
5) Full Auto (Intelligent Program AE/non-shiftable)
6) Programmed Image Control modes (5)
6) Portrait, Landscape, Close-up, Sports, Night Scene
7) Manual
8) E-TTL autoflash program AE
8) High-speed flash (FP flash), FE lock
* No A-TTL/TTL autoflash program AE
9-3 Metering range: EV 2-20 (at normal temperature with 50mm f/1.4 lens
at ISO 100)
9-4 Exposure beyond LCD digital display blinks at 2 Hz on the LCD panel and
range warning: in the viewfinder.
9-5 Exposure metering: Activated when shutter button is pressed halfway (SW-1
ON)
* Metering remains active for 4 sec. after the halfway-
depressed shutter button is let go.
9-6 ISO Speeds: The following ISO speeds are selectable with the on-
screen menu:
1) 100 (Default), 2) 200, 3) 400, 4) 800, 5) 1000
9-7 Exposure Compensation: (1) AEB (Auto Exposure Bracketing)
1) Compatible shooting modes: See the table below (at
4) ) for the shooting modes which enable AEB with the
on-screen menu.
* During AEB: The AEB icon on the LCD panel blinks,
and the *mark and AEB level blinks in the viewfinder.
2) Bracketing range: Up to +/- 2 stops in 1/2- or 1/3-
stop increments
3) Bracketing sequence: Standard exposure, decreased
exposure, and increased exposure
* Taken in accordance with the drive mode (single or
continuous).