Canon EOS D60, Service Manual

Page: 210 / 211

Report No. ACD-0054 2/3
User
Notice
Internal
Error
Contents
Probable Cause and
Countermeasure
99 6 This error occurs when the ISO setting is not
correct
.
・
Digital circuit board
（
CG2-0773-000
）
99 8 This error occurs when Image Processor IC
(DSP)
operates
abnorma
l
.
・ Digital circuit board
（
CG2-0773-000
）
99 9 This error occurs when the processing time
of D
6
0’s self-checking system exceeds
a
specified limit. This could occur when
more than one switch
is
pressed at the
same time.
・
Digital circuit board
（
CG2-0773-000
）
99 10 This error occurs when "Accumulation
→
Readout" in the sensor is being processed
again before the first completion.
・
Rewrite
t
he firmware.
2 21 CF card writing error.
・
Use the DC Coupler or recharge
the battery. Check if the CF card
is properly inserted.
・
Format the CF card
・
Replace CF card connecter
(CG1-1968).
2 22 This error occurs when image data cannot
be written to the CF card
in the following
conditions :
1) If t he CF card is not fully seated in the
camera , the D 6 0 cannot detect a " card
ready " signal within a specified time limit.
2) When the CF card is not usable because
it has been destroyed or physically
damaged.
3) When the camera's battery level is
insufficient to completely write the file to the
CF card.
・
Use the DC Coupler or recharge
the battery.
・
Check if the CF card is properly
inserted.
・
Format the CF card . R eplace the
CF card connecter (CG1-1968).
4 23 This error occurs when the free space
of the CF card is insufficient for the image
file that has been created.
・
Use a CF card with sufficient
free space.
99 25 This error occurs due to a defect in the
buffer
memory during image processing.
・
Digital circuit board
（ CG2-0773-000 ）
99 50 This error occurs when the CF card cannot
be formatted in the camera.
・
Format the CF card (first on the
PC and then in the camera).
・
Replace the CF card.
99 51 This error occurs when the images stored
on the CF card cannot be played back in
the camera.
・
Format the CF card (in the
camera)
・
Replace the CF card.
99 70 This error occurs when the image is not
proper. (Does not occur to the cameras for
mass production.)
・
Digital circuit board
（
CG2-0773-000
）
99 71 This error occurs when renewal of internal
processing data does not succeed. ・ Digital circuit board
（
CG2-0773-000
）