Canon EOS D60, Service Manual

Page: 14 / 211

Part 1: General Information
1-4
• LCD panel illumination provided
The LCD panel now has EL backlight illumination (bluish-green). When it is
turned on with the on-screen menu (off by default), the illumination turns on
when you press the SET button.
• LCD monitor easier to read
The TFT monitor's sheet material has been changed so that the visibility at
higher angles (over 40 deg. vertically and horizontally) is brighter.
8) Menu functions
• Processing parameters settable with the camera
With the camera's on-screen menus, you can set processing parameters
(contrast, sharpness, color saturation, and the newly added color tone). You can
set each parameter to one of three settings (-, 0, +). Up to three sets of
parameter settings can be set and registered. (The parameters cannot be saved
with the bundled software.)
• New menu items added
• Image-recording quality/Compression rate: Middle/Fine, Middle/Normal
• LCD panel illumination: 0: Off, 1: On
• C.Fn setting cancel: Cancel/OK
• Firmware Ver. 1.0.0
9) Custom Functions
• New Custom Functions and modified settings
New Custom Functions
Modified Settings
Canceled item
C.Fn-1: Noise reduction during long exposures, 0: Off, 1: On
10) Design
The EOS D60's exterior design differs from the EOS D30 as follows:
• The main switch has a different shape (for easier operation).
• The color on the top of the mode dial is metallic titanium instead of black.
• The PC terminal and remote control terminal now share a joint rubber cap
instead of a separate cap for each terminal.
• The shape of the interface-terminal cover (DIGITAL terminal, VIDEO terminal)
is different.