Canon EOS D60, Service Manual

Page: 134 / 211

1.14 Defragmenting the Adjustment Area
The adjustment data of the digital back section is memorized to the flash ROM of
the digital board. Since the memory will be written into a blank area accordingly,
after number of adjustments, there will be no space left to write. It is necessary to
change the arrangements of the adjustment data and make space to write. The
"D60dfrg0.fir" program does this job.
Defragmentation of the adjustment area is necessary under these conditions:
•
The adjustment software recommends to do so. (initializing the digital back,
transfering data, transferring an imager file)
•
The Error message comes up during the adjustment.
<Procedure>
1) Copy the "D60dfrg0.fir" file to CF card.
Follow the procedure as same as updating the firmware.
2) Insert the CF card.
3) When close the CF card cover, the screen shown on the right will appear.
4) Choose OK and press "SET".
5) Choose OK and press "SET" again. Wait until the
percentage displayed becomes 100%.
6) When it is done, the power will be turned off.
Part 4: Electrical Adjustments
4-24
The procedure is same as updating the firmware. Be sure to turn
off "Auto Power Off." If the power turns off during the adjustment,
an error may occur.
When the defragmentation of the adjustment of adjustment area is
done, the data will not to be deleted.
CAUTION