Canon EOS 7D Mark II (G), Instruction Manual

Page: 453 / 550

453
8
3: Custom Controls
N
During metering, tilting <
p
> to the right will switch between the current
AF point and the center AF point or registered AF point.
*4:On the setting screen, when you press the <
B
> button, you can select [ Switch to
center AF point ] or [ Switch to registered AF point ]. To register the AF point, see
page 450.
During metering, you can select an AF point directly with the <
9
> dial
or <
5
> without pressing the <
S
> button. With the <
5
> dial, you can
select a left or right AF point. (Looping sequence for Zone AF and Large
Zone AF.)
*5:On the Multi-controller setting screen, when you press the <
B
> button, you can
press the center of <
9
> to select [ Switch to center AF point ] or [ Switch to
registered AF point ]. To register the AF point, see page 450.
During metering, you can turn the <
5
> dial to directly select an upper
or lower AF point without pressing the <
S
> button. (Looping sequence
for Zone AF and Large Zone AF.)
During metering, you can use <
p
> to directly select an AF area
selection mode without pressing the <
S
> button.
: Selected AF point z Center/Registered AF point
: Direct AF point selection
: Direct AF point selection: Vertical
: Direct AF area selection
If [ Direct AF point selection ] is assigned to <
9
>, you cannot use <
9
> to
scroll up/down the shooting information display (p.354, 357) during the
image review just after shooting.