Canon EOS 7D Mark II (G), Instruction Manual

Page: 248 / 550

248
You can connect the Remote Switch RS-80N3 (sold separately) or
Timer Remote Controller TC-80N3 (sold separately) or any EOS
accessory equipped with an N3-type terminal to the camera for
shooting (p.478).
To operate the accessory, refer to its instruction manual.
1
Open the terminal cover.
2
Connect the plug to the remote
control terminal.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
silver part and pull.
F
Using a Remote Switch
R
Remote Control Shooting
With Remote Controller RC-6 (sold separately), you
can shoot remotely up to approx. 5 meters/16.4 feet
from the camera. You can either shoot immediately or
use a 2-sec. delay.
You can also use Remote Controller RC-1 and RC-5.
1
Focus on the subject.
2
Set the lens’s focus mode switch
to <MF>.
You can also shoot with <
f
>.
3
Press the <
o
> button.
(
9
)