Canon EOS 7D Mark II (G), Instruction Manual

Page: 205 / 550

205
The interval (time) to update the geotag information can be set.
Although updating the geotag information at shorter intervals will make
it more accurate, it will reduce the number of possible shots.
1
Select [Set up].
Check that [ GPS ] is set to [ Enable ].
Select [ Set up ], then press <
0
>.
2
Select [Position update interval].
3
Set the desired update interval.
Select the desired update interval,
then press <
0
>.
Setting the Positioning Interval
The shorter the interval, the lower the number of possible shots will be.
If you are in a location where the GPS acquisition condition is not good,
the number of possible shots will decrease.
The nature of GPS may cause some inconsistency in positioning
intervals.