Canon EOS 7D Mark II (G), Instruction Manual

Page: 276 / 550

Using Wireless Flash
N
276
4
Set [Flash mode] to [E-TTL II].
5
Set [Wireless func.] to [
0
].
6
Set [Channel].
Set the channel (1-4) to the same one
as the slave unit.
7
Set [Firing group] to [
1
All].
The slave unit may be set to any firing
group (A, B, or C).
8
Fire a test flash.
Check that the slave unit is ready to
fire, then while the [
Built-in flash
settings ] screen is displayed, press
the <
B
> button.
X The slave unit will fire.
9
Take the picture.
Set the camera and take the picture
in the same way as with normal flash
shooting.
To terminate wireless flash shooting,
set [
Wireless func. ] to [ Disable ].
Setting [ E-TTL II meter. ] to [ Evaluative ] is recommended.
Wireless MULTI flash shooting is not possible.