Canon EOS 7D Mark II (G) Instruction Manual Download Page 399

Page: 399 / 550

399

Processing RAW Images with the Camera

Displaying the setting screen

Press <

> to display the setting

screen. Turn the <

> or <

> dial

to change the setting. Press <

> to

finalize the setting and return to the
previous screen.

Save the image.

Select [

] (Save), then press <

Select [

] to save the image.

Check the destination folder and
image file number, then select [

To process another image, repeat
steps 2 to 4.

You can magnify the image by pressing the <

> button in step 3. The

magnification will differ depending on the pixel count of [

Image quality

]

set in [

RAW image processing

]. With <

>, you can scroll around the

magnified image.
To cancel magnified view, press the <

> button again.

Images shot with the aspect ratio (p.404) set to [

4:3

], [

16:9

], or [

1:1

] will

be displayed with lines indicating the image area. JPEG images
generated from RAW images will be saved in the set aspect ratio.

Magnified View

Images with Aspect Ratio Setting

Summary of Contents for EOS 7D Mark II (G)







































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 7D Mark II (G)

Reviews:

Related manuals for EOS 7D Mark II (G)

Brands by name

Popular brands

Canon EOS 7D Mark II (G), Instruction Manual

Search results

Summary of Contents for EOS 7D Mark II (G)

Reviews:

Related manuals for EOS 7D Mark II (G)

Brands by name

Popular brands