manualshive.com logo in svg

Canon EOC-1DX, Instruction Manual

Share
Download
Canon EOC-1DX Instruction Manual Download Page 76

76

Autofocusing with 61 points is possible. All of the AF area selection 
modes are selectable.

: Dual cross-type AF point. Subject 

tracking is superior and the focusing 
precision is higher than with other AF 
points.

: Cross-type AF point. Subject 

tracking is superior and high-
precision focusing is achieved.

: AF points sensitive to horizontal 

lines.

Lenses and Usable AF Points

Group A

 

Although the camera has 61 AF points, 

the number of usable AF 

points and focusing patterns will differ depending on the lens. The 
lenses are thereby classified into eight groups from A to H. Check 
which group your lens belongs to.

 

When using a lens from groups F to H, fewer AF points will be usable.

 

When you press the <

S

> button, the AF points indicated by the   mark 

will blink. (The  / /  AF points will stay lit.)

 

“Extender EF1.4x” and “Extender EF2x” apply to all the I/II/III models.

 

Regarding new lenses marketed after the EOS-1D X, check Canon’s 
Web site to see which group they belong to.

 

Some lenses may not be available in certain countries or regions.

EF24mm f/1.4L USM

EF50mm f/1.8 II

EF200mm f/1.8L USM
+ Extender EF1.4x

EF24mm f/1.4L II USM

EF85mm f/1.2L USM

EF200mm f/2L IS USM

EF28mm f/1.8 USM

EF85mm f/1.2L II USM

EF200mm f/2L IS USM
+ Extender EF1.4x

EF35mm f/1.4L USM

EF85mm f/1.8 USM

EF200mm f/2.8L USM

EF35mm f/2

EF100mm f/2 USM

EF200mm f/2.8L II USM

EF50mm f/1.0L USM

EF135mm f/2L USM

EF300mm f/2.8L USM

EF50mm f/1.2L USM

EF135mm f/2L USM
+ Extender EF1.4x

EF300mm f/2.8L IS USM

EF50mm f/1.4 USM

EF135mm f/2.8 (Softfocus)

EF300mm f/2.8L IS II USM

EF50mm f/1.8

EF200mm f/1.8L USM

EF400mm f/2.8L USM

COP

Y

Summary of Contents for EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands