manualshive.com logo in svg

Canon EOC-1DX, Instruction Manual

Share
Download
Canon EOC-1DX Instruction Manual Download Page 229

229

k

 Shooting Movies

Notes on Movie Shooting

The final image simulation is a function that allows you to see the 
effects of the Picture Style, white balance, etc., on the image.
During movie shooting, the image displayed will automatically reflect 
the effects of the settings listed below.

Final image simulation for movies

 

Picture Style

* All settings such as sharpness, contrast, color saturation, and color tone will 

be reflected.

 

White balance

 

White balance correction

 

Exposure

 

Depth of field

 

Auto Lighting Optimizer

 

Peripheral illumination correction

 

Chromatic aberration correction

 

Highlight tone priority

Final Image Simulation

 

Under [

z

5: Movie shoot. btn

], if [

V

/

o

] is selected, you can press 

the shutter button completely to start or stop the movie shooting (p.242).

 

Monaural sound is recorded by the camera’s built-in microphone (p.221).

 

By connecting a stereo microphone (commercially available) equipped 
with a 3.5 mm mini plug to the camera’s external microphone IN terminal 
(p.21), stereo sound recording is possible.

 

With a fully-charged Battery Pack LP-E4N, the total movie shooting time 
will be as follows: approx. 2 hr. 10 min. at room temperature (23°C/73°F), 
and approx. 2 hr. at low temperatures (0°C/32°F).

 

When using a (super) telephoto lens equipped with the power focus 
mode marketed since the second half of 2011, power focusing is 
possible during movie shooting.

COP

Y

Summary of Contents for EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands