manualshive.com logo in svg

Canon EOC-1DX, Instruction Manual

Share
Download
Canon EOC-1DX Instruction Manual Download Page 194

194

3

 Setting the Flash

You can set the flash-sync speed for 
flash photography in the aperture-priority 
AE (

f

) mode.

 

: Auto

The flash sync speed is set automatically within a range of 1/250 
sec. to 30 sec. to suit the scene’s brightness. High-speed sync is 
also possible.

 

: 1/250-1/60 sec. auto

Prevents a slow shutter speed from being set in low-light conditions. 
It is effective for preventing subject blur and camera shake. 
However, while the subject will be properly exposed with the flash, 
the background may come out dark.

 

: 1/250 sec. (fixed)

The flash-sync speed is fixed at 1/250 sec. This more effectively 
prevents subject blur and camera shake than with [

1/250-1/60 sec. 

auto

]. However, in low light, the subject’s background will come out 

darker than with [

1/250-1/60 sec. auto

].

[Flash sync. speed in Av mode]

If [

1/250-1/60 sec. auto

] or [

1/250 sec. (fixed)

] is set, high-speed sync is 

not possible in the <

f

> mode.

COP

Y

Summary of Contents for EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands