manualshive.com logo in svg

Canon EOC-1DX, Instruction Manual

Share
Download
Canon EOC-1DX Instruction Manual Download Page 289

289

R

 Processing RAW Images with the Camera

 

 Color space

 

(p.162)

You can select either sRGB or Adobe RGB. Since the camera’s LCD 
monitor is not compatible with Adobe RGB, the image will not look 
very different when either color space is set.

 

 

Peripheral illumination correction

 

(p.151)

If [

Enable

] is set, the corrected image will be displayed. If the effect 

is difficult to discern, press the <

u

> button to magnify the image 

and check the corners. (Press the <

u

> button again to return to the 

normal view.) The peripheral illumination correction applied with the 
camera will be less pronounced than with Digital Photo Professional 
(provided software) and may be less apparent. In such a case, use 
Digital Photo Professional to apply the peripheral illumination 
correction.

 

 Distortion correction

When [

Enable

] is set, image distortion due to the lens 

characteristics is corrected. If [

Enable

] is set, the corrected image 

will be displayed. The image periphery will be cropped in the 
corrected image due to image processing.
Since the image resolution may decrease slightly, use the Picture 
Style’s Sharpness parameter to make adjustments as necessary.

When processing images with [

Distortion correction

] set to [

Enable

], AF 

point display information (p.249) and Dust Delete data (p.295) will not be 
appended to the image.

COP

Y

Summary of Contents for EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands