manualshive.com logo in svg

Canon EOC-1DX, Instruction Manual

Share
Download
Canon EOC-1DX Instruction Manual Download Page 216

216

You can magnify the image and focus precisely with manual focus.

1

Set the lens focus mode switch to 
<MF>.

 

Turn the lens focusing ring to focus 
roughly.

2

Move the magnifying frame.

 

Use <

9

> to move the magnifying 

frame to the position where you want 
to focus.

 

Pressing <

9

> straight down will 

return the magnifying frame to the 
image center.

3

Magnify the image.

 

Press the <

u

> button.

X

The area within the magnifying frame 
will be magnified.

 

Each time you press the <

u

> button, 

the view will change as follows:

4

Focus manually.

 

While looking at the magnified image, 
turn the lens focusing ring to focus.

 

After achieving focus, press the <

u

> 

button to return to the normal view.

5

Take the picture.

 

Check the focus and exposure, then 
press the shutter button completely to 
take the picture (p.201).

Focusing Manually

Magnifying frame

AE lock

Magnified area position

Magnification

Approx. 

5x

Approx. 

10x

Normal 

view

COP

Y

Summary of Contents for EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands