manualshive.com logo in svg

Canon EOC-1DX, Instruction Manual

Share
Download
Canon EOC-1DX Instruction Manual Download Page 215

215

Using AF to Focus

3

Select the AF point.

 

Use the <

9

> to select an AF point. If 

you press <

9

> straight down, the 

center AF point (or center Zone) will 
be selected.

 

You can also use the <

6

> and 

<

5

> dials to select the AF point. The 

<

6

> dial selects an AF point in the 

horizontal direction, and the <

5

> 

dial selects an AF point in the vertical 
direction.

4

Focus the subject.

 

Aim the AF point over the subject and 
press the shutter button halfway.

X

The Live View image will turn off, the 
reflex mirror will go back down, and AF 
will be executed. (No picture is taken.)

X

When focus is achieved, the beeper 
will sound and the Live View image 
will reappear.

X

The AF point used to focus will light 
up in green.

X

If focus is not achieved, the AF point 
will blink in orange.

5

Take the picture.

 

Check the focus and exposure, then 
press the shutter button completely to 
take the picture (p.201).

You cannot take a picture during autofocusing. Take the picture while the 
Live View image is displayed.

COP

Y

Summary of Contents for EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands