manualshive.com logo in svg

Canon EOC-1DX, Instruction Manual

Share
Download
Canon EOC-1DX Instruction Manual Download Page 360

360

You can check the battery’s condition on the LCD monitor.

Select [Battery info.].

 

Under the [

5

3

] tab, select [

Battery 

info.

], then press <

0

>.

3

 Checking the Battery Information

Battery model or household power source 
being used.

The battery level icon (p.39) is displayed 
together with the remaining battery 
capacity shown in 1% increments.

Shots taken with the current battery. The 
number is reset when the battery is 
recharged (p.30).

Battery’s recharge performance level is 
displayed in one of three levels.

   (Green):

Battery’s recharge performance is fine.

   (Green):

Battery’s recharge performance is 
slightly degraded.

   (Red): 

Purchasing a new battery is recommended.

The use of a genuine Canon Battery Pack LP-E4N or LP-E4 is recommended. 
If you use any battery other than the Battery Pack LP-E4N or LP-E4, the 
camera’s full performance may not be attained or malfunction may result.

 

The shutter count is the number of still photos taken. (Movies are not counted.)

 

If [

Calibration is recommended when charging battery next time

] is 

displayed, see page 32.

 

If for some reason, communication with the battery is not successful, [

Use 

this battery?

] will be displayed. Just select [

OK

] and you can continue 

shooting. However, the battery information screen might not appear. 

COP

Y

Summary of Contents for EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands