manualshive.com logo in svg

Canon EOC-1DX, Instruction Manual

Share
Download
Canon EOC-1DX Instruction Manual Download Page 56

56

Before You Start

 

The card is new.

 

The card was formatted by a different camera or a computer.

 

The card is full with images or data.

 

A card-related error is displayed

 (p.388)

.

Format the card in the following cases:

 

Cards with 128 GB or lower capacity will be formatted in FAT format. 
Cards with a capacity over 128 GB will be formatted in exFAT format. If 
you format a card with a capacity over 128 GB with this camera and then 
insert it into another camera, an error may be displayed and the card 
may become impossible to use. Depending on the personal computer’s 
OS or card reader, it may not recognize a card formatted in exFAT 
format.

 

When the card is formatted or data is erased, only the file management 
information is changed. The actual data is not completely erased. Be 
aware of this when selling or discarding the card. When discarding the 
card, destroy the card physically to prevent personal data from being 
leaked.

 

The card capacity displayed on the card format screen may be smaller 
than the capacity indicated on the card.

 

This device incorporates exFAT technology licensed from Microsoft.

COP

Y

Summary of Contents for EOC-1DX



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands