Canon DP-V2410 Instruction Manual Download Page 60

Page: 60 / 96

OSD Menu

System Settings

This menu is used to configure settings related the system of the video display.

Item

Setting Options (underline indicates factory default)

Network

Configures settings for the network of the video display.

Configure an IP
Address

Automatic

: Configures an IP address automatically with DHCP/Automatic IP.

Manual

: Configure an IP address and subnet mask manually.

Display

192.168.0.1

Subnet Mask

255.255.255.0

Language

Sets the language of the OSD menu and messages.

English,

Function/Channel Button

Sets the function or channel to assign to the F buttons or CH button.

Display
Function/Display
Function (CDL)

Sets the function to assign to the F buttons of the main unit. Select an F button and assign a
function from the following list. The factory defaults for the main unit F buttons is as follow:

Normal mode

F1 :

Contrast

F2 :

Brightness

F3 :

Time Code (On, Off)

F4 :

WFM/VEC (On, Off)

F5 :

Audio Level Meter (On, Off)

F6 :

Zoom (On, Off)

F7 :

Hide OSD (On, Off)

F8 :

Boost Contrast (On, Off)

CDL mode

F1 :

CDL R (On, Off)

F2 :

CDL G (On, Off)

F3 :

CDL B (On, Off)

F4 :

CDL Power (On, Off)

F5 :

CDL Offset (On, Off)

F6 :

CDL Slope (On, Off)

F7 :

CDL Saturation (On, Off)

F8 :

CDL Bypass (On, Off)

Note

• When the "Backlight Control" setting is switched using an F button, the information is applied

to "Backlight Control" in "Picture Mode".

• When "Hide OSD" is set to "On", no OSD is displayed. Although operation can be performed

even when OSD is hidden, OSD for the operation is not displayed.

Summary of Contents for DP-V2410

































































































Search results

Summary of Contents for DP-V2410

Reviews:

Related manuals for DP-V2410

Brands by name

Popular brands

Canon DP-V2410, Instruction Manual

Search results

Summary of Contents for DP-V2410

Reviews:

Related manuals for DP-V2410

Brands by name

Popular brands