8
Power Supply
• Be sure to connect the scanner to an AC 220-240V (50/60 Hz) or AC 120V
(60 Hz) power supply, according to your region’s requirements.
• Make sure that the scanner is connected to an independent power outlet. Do not
plug the scanner into an outlet shared with another device. If you use an
extension cable, pay attention to the total amperage of the cable.
• If you are unsure of anything relating to the power supply, contact your dealer,
service representative, or your local power company.
• Never place an object on top of the power cord or step on the power cord.
• Never bundle the power cord or wrap the cord around an object, such as a table
leg.
• Do not tug on the power cord. When you remove the power cord, grip it by the
plug head.
• Keep the area around the power outlet free of obstacles.
Carrying
When you move the CR-180, hold it firmly with both hands and carry it carefully.
The scanner weighs approximately 13.9 lb (6.3 kg).
When moving the scanner, be sure to turn OFF the power and remove any cables. If
the cables are not removed before moving the scanner, you may damage the plugs or
connectors by forcibly pulling them out.
WARNING
