5
Safety Precautions
Daily Maintenance
When you are working around the scanner, follow these precautions to avoid fire
and electrical shock.
■
Never install and operate the scanner near flammable substances, such as alcohol,
paint thinner, benzene, or any other type of volatile solution.
■
Never damage or modify the power cord, and never place heavy objects on the power
cord.
■
Always make sure that your hands are dry when you are handling the power cord or
plug. Never grasp the plug when your hands are wet.
■
Never plug the scanner into a multiplug power strip.
■
Never bundle, wrap, or tie the power cord around itself or another object. Connect the
plug securely into the power source.
■
Use only the power cord and plug provided with the scanner.
■
Never attempt to disassemble or modify the scanner.
■
Never use flammable aerosol products near the scanner.
■
Before you clean the scanner, turn the power OFF and disconnect the power cord
from the power outlet.
■
To clean the scanner’s exterior, use a firmly wrung cloth, moistened slightly with
water or mild detergent. Never use any type of volatile solution, such as alcohol,
benzene or paint thinner.
■
If you hear strange sounds, detect smoke or abnormal heat, sense vibration, or smell
odd odors around the scanner, turn OFF the power switch immediately and
disconnect the power cord from the power outlet. Call for service immediately.
■
Handle the scanner with care. Avoid shocks and vibrations to the scanner caused by
reckless handling. If you suspect the scanner has been accidentally damaged, turn
OFF the power switch immediately and disconnect the power cord from the power
outlet. Call for service immediately.
■
Before you move the scanner, always turn OFF the power and disconnect the power
cord from the power outlet.
WARNING
