56
Chapter 6
Maintenance
3
Spin the rollers while wiping them clean with a firmly wrung cloth
dampened with water or a mild detergent.
There are 13 roller positions, as shown in the diagram below.
●
Use cotton swabs to clean the rollers in locations that are too narrow for your
fingers.
●
Rollers in positions
i
to
!2
are turned by the roller in position
!3
. Turn the roller
in position
!3
to wipe the rollers.
●
Open the scanning unit to clean the rollers in positions
y
to
!1
.
4
Push down the lock lever to release the lock on the scanning unit
(
q
), and then open the scanning unit (
w
).
5
Use cotton swabs that are commercially available to clean the
entire scanning glass.
Scanning Unit
Note
Scanning Glass
(two sides)
Lock Lever
