Canon ColorPASS-Z20e Service Manual Download Page 78

Page: 78 / 122

2000 2000 2000

ColorPASS-Z40e/Z20e REV.0 AUG. 2000

CHAPTER 4 DISASSEMBLY/ASSEMBLY

4-30

5.8.2 CPU Fan

The following steps describe the procedure required in order to replace the 12V CPU fan

and heatsink assembly. A clip holds the assembly to the CPU socket.

F04-508-02 Removing the CPU fan (clip not shown)

a. To Remove the CPU Fan and Heatsink

1. Remove the CPU fan cable from motherboard connector CPU FAN.
2. Shift down the clip of the CPU fan toward the CPU fan to remove the CPU fan.
3. Lift the fan and heatsink assembly away from the CPU.

b. To Replace the CPU Fan

1. Align the CPU fan with the heatsink.
2. Hook the clip of the CPU fan on the claw of the base, and secure the CPU fan to the

motherboard.

3. Reattach the CPU fan cable to motherboard connector CPU FAN.
4. Reassemble the ColorPASS and verify its functionality (see “Restoring ColorPASS

functionality after service” on page 4-10).

Claw

Clip

CPU fan

Summary of Contents for ColorPASS-Z20e



















































































































Search results

Summary of Contents for ColorPASS-Z20e

Reviews:

Related manuals for ColorPASS-Z20e

Brands by name

Popular brands

Canon ColorPASS-Z20e, Service Manual

Search results

Summary of Contents for ColorPASS-Z20e

Reviews:

Related manuals for ColorPASS-Z20e

Brands by name

Popular brands