COPYRIGHT© 2000 CANON INC.
2000 2000 2000
ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 3 INSTALLATION
3-6
1.4 Installing Additional Options
If the customer has purchased additional ColorPASS options, install those before connect-
ing the ColorPASS to the network. For installation instructions, see the documentation in-
cluded in each option kit.
After installing options, print the Test Page to verify that the system is operating properly.
Checking the installation at each stage makes it easier to pinpoint the cause of problems
should they occur.
1.5 Connecting to the Network
ColorPASS network support is provided through the Ethernet board. The Ethernet
board10/100BaseT connector is located at slot 6 on the back panel. Supported Ethernet
board cabling includes 10/100BaseT unshielded twisted pair. For additional network infor-
mation, see the Configuration Guide.
Token Ring compatibility is available with the optional Token Ring kit (see the documen-
tation included with that kit for more information).
F03-105-01 Network connectors on the back panel
Optional Token Ring
board connectors
RJ-45 connector
for UTP
DB-9 connector
for STP
RJ-45 connector
for 10/100BaseT
twisted pair Ethernet
