COPYRIGHT© 2000 CANON INC.
2000 2000 2000
ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 4 DISASSEMBLY/ASSEMBLY
4-1
1 Points to Note
1.1 General Cautions
•
Disconnect the power plug for safety before starting disassembly/assembly work.
• Unless otherwise noted, assemble the parts by reversing the steps used to disassemble
them.
• Identify the screws by type (length, diameter) and location.
• Do not forget to attach a washer to any screws that had a washer before removal. Be
sure to use the same screws for any particular location.
1.2 Shut Down the ColorPASS
Shut down the ColorPASS abruptly can disrupt the function of the network. Be sure to
obtain the consent of the network supervisor before shut down it.
1.3 Handling the Parts
The components of the printer board unit are susceptible to static electricity. Be sure to
wear a wrist strap designed for discharging static electricity when handling the components.
A hard disk drive, highly sensitive to magnetic force, is installed on the side panel oppo-
site the power supply. Do not use a magnet screwdriver during work around it.
The hard disk drive, further, is susceptible to impact. Do not subject it to shocks.