15
chapter 2
Installing
ScanGear CS-U
Top Page
Glossary
Contents
Index
3.
Place the CanoScan Setup Utility CD-ROM in the drive.
4.
Wait for approximately 10 seconds. Click the [Removable Media...]
option so that it is unchecked, and click the [Specify a location]
option so that it is checked. Then click the [Browse] button.
5.
From the [CanoScan] CD-ROM, select the [Scangear] folder
followed by the appropriate language folder, and click the [OK]
button.
6.
Confirm that the correct folder and path appear beside the [Specify
a location] option and click the [Next] button.
7.
When the name of the scanner appears, click the [Next] button.
The driver will begin to install.
8.
When the [Windows has finished installing the new hardware
device.] message appears, click the [Finish] button.
