Canon AXIS 1650 User Manual Download Page 8

Page: 8 / 75

Product Overview

AXIS 1650 User’s Manual

Supported

Environments

The AXIS 1650 supports printing over TCP/IP from the following clients:

•

Windows 98

•

Windows Me

•

Windows 2000

•

Windows XP

•

Windows Server 2003

•

Netware

Installation and

Integration

The installation of the AXIS 1650 and its integration into the network is

performed using one of these software combinations:

•

AXIS IP JumpStarter (for IP setting) and then AXIS CAPT Print
Monitor (for printer installation)

•

Canon

NetSpot Device Installer (for IP setting) and then AXIS CAPT

Print Monitor (for printer installation)

•

AXIS ScanClient to enable scanning through the AXIS 1650.

Configuration and

Management

Configuration and management of AXIS 1650 is performed using the

TCP/IP protocol. The main method is using a standard Web browser. See

“Print Server Management from the Embedded Web Pages” on page 40.

Printing Protocol:

TCP/IP

Speed

The AXIS ETRAX chip has been specifically designed for LAN products

and benefits users with a faster throughput than a direct PC-to-printer

connection. With a sustained data throughput of over 1 Mbytes per

second (100baseTX) the AXIS 1650 is fast. ECP high-speed

communication is supported.

Security:

You can assign a password that restricts unauthorized configuration of

the AXIS 1650.

Monitoring:

The AXIS 1650 embedded Web pages allow you to continuously monitor

printer status. Additionally, the AXIS 1650 supports SNMP for remote

monitoring.

Future proof:

You can upgrade the AXIS 1650 Flash memory over the network. This

allows you to quickly update and enhance the operational features of

your AXIS 1650 when new print server software becomes available.

AXIS IP JumpStarter, AXIS CAPT Print Monitor and AXIS ScanClient

are available free of charge from the AXIS 1650 CD and on

www.axis.com

NetSpot Device Installer is available on www.canon.com

Summary of Contents for AXIS 1650












































































Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands

Canon AXIS 1650, User Manual

Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands