manualshive.com logo in svg

Canon AXIS 1650, User Manual, Page: 23 / 75

Share
Download
Canon AXIS 1650 User Manual Download Page 23

Windows Installation

AXIS 1650 User’s Manual

23

4. Leave this check-box unchecked and click 

Next. 

(If you want to disable broadcast status updates and enable unicast, See 
Enabling Unicast Network Communication, on page 64 for instructions.)

5. Click 

Finish to finish the installation.

6. Select 

Settings | Printers from the Start menu and double-click the Add 

Printer icon to start the Add Printer Wizard.

7. Select 

Local Printer, as the AXIS 1650 emulates a local printer port and click 

Next>

8. Choose an appropriate printer driver for your printer.

If the desired driver appears in the manufacturer and models list dialog, 
highlight your selection and click 

Next>.

If the desired printer driver is not available, click the 

Have Disk... button. 

Insert the printer driver CD that was provided with your printer, select the 
CD drive and click 

OK.

9. Select the desired printer driver from the CD and click 

Next>

Summary of Contents for AXIS 1650












































































Reviews:

No comments