Canon AXIS 1650 User Manual Download Page 48

Page: 48 / 75

Print Server Management and Configuration

AXIS 1650 User’s Manual

Setting Restrictions

To change print server permissions and restrictions, select Admin |

General Settings => Change and select the Restrictions tab in the Web

interface.

TCP Restriction Enabled

When set to Yes, users specified in the IP Address List are rejected or

accepted (depending on how the TCP Restriction Mode is set), to send

print jobs over the print server.

Default = No

TCP Restriction Mode

When set to Accept, users specified in the TCP Restriction IP Address List

are allowed to use this print server.

When set to Reject, users specified in the TCP Restriction IP Address List

are not allowed to use this print server.

Default = Accept

TCP Restriction IP Address

List

Here you specify the users which are allowed (or not allowed, depending

on how TCP Restriction Mode is set) to use the print server. IP addresses

or ranges of IP addresses can be specified:

Example IP addresses: 10.13.16.150, 10.13.16.151

Example IP address range: 10.13.16.160-0.13.16.170

Default = <blank>

Note: If your print server is connected to a CAPT 1.0 printer you will

receive an error message stating Network Error if you are not allowed to

print with this print server

SNMP Restriction Enabled

When set to Yes, users specified in the SNMP Restriction IP Address List

are rejected or accepted (depending on how the SNMP Restriction mode is

set).

Default = No

SNMP Restriction Mode

When set to Accept, only users specified in the SNMP Restriction IP

Address List are permitted to specify/browse the settings for the device

using the SNMP protocol.

When set to Reject, only users specified in the SNMP Restriction IP

Address List are rejected from specifying/browsing the settings for the

device using the SNMP protocol.

Default = Accept

SNMP Restriction IP

Address List

Users specified here are rejected or accepted. IP addresses or ranges of IP

addresses can be specified as follows:

Example IP addresses: 10.13.16.150, 10.13.16.151

Example IP address range: 10.13.16.160-10.13.16.170

Default = <blank>

SLP Restriction Enabled

When set to Yes, users specified in SLP Restriction IP Address List are

rejected or accepted (depending on how the SLP Restriction Mode is set).

Default = No

SLP Restriction Mode

When set to Accept, only users specified in the SLP Restriction IP Address

List are permitted to specify/browse the settings for the device using the

SLP protocol.

When set to Reject, only users specified in the SLP Restriction IP Address

List are rejected from specifying/browsing the settings for the device

Summary of Contents for AXIS 1650












































































Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands

Canon AXIS 1650, User Manual

Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands