Canon AXIS 1650 User Manual Download Page 25

Page: 25 / 75

Windows Installation

AXIS 1650 User’s Manual

Print Server Installation using the Standard TCP/IP Port in Windows 2000/XP/2003

Follow the instructions below to use the Windows Standard TCP/IP Port

to add a network printer in Windows 2000/ Windows XP/2003.

Windows XP/ Server 2003:

1. Go to

Start | (Settings) | Printers and Faxes and click the Add a Printer

icon to start the

Add Printer Wizard. Click Next.

Windows 2000:

1. Go to

Start | Settings | Printers and click the Add Printer icon to start

the

Add Printer Wizard. Click Next.

2. Select

Local Printer attached to this computer and make sure the

Automatically detect and install my Plug and Play printer check box is not
checked. Click

Next.

3. Click the

Create a new port radio button and select Standard TCP/IP Port

from the list. Click

Next and the Add Standard TCP/IP Printer Port Wizard

starts. Click

Next.

Summary of Contents for AXIS 1650












































































Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands

Canon AXIS 1650, User Manual

Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands