Canon AXIS 1650 User Manual Download Page 56

Page: 56 / 75

Scanning with AXIS 1650

AXIS 1650 User’s Manual

Using AXIS ScanClient

Connect to the

Scanner

1. Start

AXIS ScanClient (Start | AXIS ScanClient). The client will search the

network for scanning devices. Mark the one you would like to use by
clicking on it in the list (you can also select a scanner by entering its IP
address). Click [Connect].

2. If the scanner is busy

AXIS ScanClient will show who is using it, otherwise

you will be connected, as indicated on the message line.

Click [Help] to get information on how to connect and disconnect.

Disconnect from the

Scanner

You end a scanning session by clicking [Disconnect] on the AXIS

ScanClient.

The message line will change to Disconnected.

Note:

The scanning session will automatically end and the channel will be

disconnected after 5 minutes of inactivity.

Invoking a Scan from your Computer

Start a Scan from

your Computer

Connect to the scanner with AXIS ScanClient - see page 56 - and place

the object to be scanned on the scanner flatbed.

Summary of Contents for AXIS 1650












































































Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands

Canon AXIS 1650, User Manual

Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands