Canon AXIS 1650 User Manual Download Page 45

Page: 45 / 75

Print Server Management and Configuration

AXIS 1650 User’s Manual

Printer Page

By clicking the printer icon on the This Print Server page, a Printer page

opens, allowing you to view the status and the supported capabilities of

the connected printer.

On some printer models, you can also print a test page from the Printer

page. Note: It is only possible to print a test page on Canon printers that

support printing standard ASCII characters. It is not possible to print a

test page on Canon printers supporting Canon Advanced Printing

Technology and Canon Advanced Raster Printing System.

Underneath the printer icon is a colored symbol that indicates the status

of the printer:

•

green indicates that the printer is ready for printing

•

yellow indicates warning

•

red indicates error

A dimmed printer indicates that no printer is connected to that port.

Printer Status

The printer page shows status and capabilities of the printer that is

connected to the selected printer port. The capabilities include Detailed

Status, Manufacturer, Command Sets and Capabilities. The extent of this

information depends on the printer model.

Network Names

Click Network Names to see a list of names that the printer is identified

with in the supported network environments.

Print Jobs

Select Print Jobs to view Printer Usage, showing the accumulated usage

of the printer connected to your print server. The Printer Usage log is

erased each time the print server is restarted.

•

Printer - shows the printer model.

•

Port - shows the port to which the printer is connected.

•

Status - shows the status of the printer. The available status messages
are

ready

busy

and

off-line

•

Printed Pages - shows the number of pages that the printer has printed
(not shown for all printer models).

View Job Log

Presents the 32 latest print jobs as Document Name, Owner, Page Count,

Time and Print Results. The time when the document was printed is only

available if the print server has access to a time server.

Print Server Uptime

Shows the time elapsed since last time the print server was restarted.

Scanner

Shown for multifunctional Canon devices which have scanning

capabilities. If the scanner is in use, the status will change from Idle to

Busy and the User name will be shown.

Summary of Contents for AXIS 1650












































































Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands

Canon AXIS 1650, User Manual

Search results

Summary of Contents for AXIS 1650

Reviews:

Related manuals for AXIS 1650

Brands by name

Popular brands