Canon 40D - EOS 40D DSLR, Service Manual

Page: 28 / 209

General Information
23
7-10 On-screen 1) Focus information
information display:
AF point
2) Exposure information
Shutter speed, aperture, AE lock, ISO speed, exposure level
3) Captured image information
Picture Style, histogram, shots remaining
4) Battery check icon
7-11 Silent shooting: Provided (Mode 1 and Mode 2)
7-12 Number of possible
With Battery Pack BP-511A
shots:
7-13 Shutter-release time
1) With SW-1 ON, time lag from SW-2 ON to the start of the
lag:
exposure: 0.059 sec.
2) With SW-1 and SW-2 pressed simultaneously, time lag until
the start of the exposure: 0.126 sec.
＊ Time lag figures above apply with the aperture stopped down by up to 3 stops
(reflex mirror operation time excluded).
7-14 Remote Live View
Enabled with EOS Utility
shooting:
8．Autofocus
8-1 Type:
TTL-CT-SIR AF-dedicated CMOS sensor
8-2 AF points:
Nine cross-type AF points (f/2.8 at center)
8-3 Focusing modes:
1) Autofocus
⑴ One-Shot AF
＊ Set automatically in the Portrait, Landscape, Close-up, and Night Portrait
modes.
⑵Predictive AI Servo AF
＊ Set automatically in Sports mode.
⑶ AI Focus AF (Switches between One-Shot AF and AI SERVO
AF automatically)
＊ Set automatically in Full Auto and Flash Off modes.
2) Manual focus
8-4 Focusing point
1) Manual selection
selection:
＊ With C.Fn III-3-1/2, the Multi-controller or Quick Control Dial can be used
to select the AF point directly.
2) Automatic selection
＊ Set automatically in Basic Zone and A-DEP modes.
8-5 Selected AF point Indicated by superimposed display in the viewfinder and on
display: the LCD panel
8-6 AF activation:
Press the shutter button halfway or press the AF start button
8-7 Focus confirmation:
Indicated by superimposed display in viewfinder, focus
confirmation light, and beeper
8-8 AF working range:
EV -0.5 - 18 (at 23°C/73°F and ISO 100, under Canon's
testing standards)
Temperature
Shooting Conditions
AE 100% AE 50%, FA 50%
At 23℃ /73 F Approx. 180 Approx. 170
At 0℃ /32 F Approx. 140 Approx. 130
* Based on CIPA (Camera & Imaging Products Association)
testing standards.