Canon 40D - EOS 40D DSLR, Service Manual

Page: 20 / 209

General Information
15
８）Camera Direct Printing
⑴Direct printing
As with the EOS-1D Mark III, RAW and sRAW printing and Red-Eye 1 are provided.
Compatible only with PictBridge. BubbleJet Direct and CP Direct are not supported. Also,
the following features are new.
●Printing effects preview
Printing effects like B/W, Vivid, Brightness, and
Adjust levels are now reflected in the displayed
image so you can see the effect. (Fig. 026. Excluding
Face Brightener and Red-eye corr.)
●Tilt correction
With the trimming screen, turn the Quick Control
Dial to tilt the image up to ±10 degrees in 0.5°
increments. (Fig. 027)
⑵Print order (DPOF) and direct image transfer
Same as with EOS 30D.
９）Interface
USB 2.0 Hi-Speed is provided for the interface with
personal computers and camera direct printing. As
shown in Fig. 028, the other terminals are the same as
EOS 30D.
Also, the camera bottom has an extension system
terminal (Fig. 029).
Fig. 026 Printing effects
Fig. 028 Terminals
Fig. 029 Extension system terminal
Fig. 027 Tilt correction