Canon 40D - EOS 40D DSLR Service Manual Download Page 83

Page: 83 / 209

Repair Information

１） Base Plate Ass'y Removal

⑴Remove 5 screws from the bottom, and remove the base plate assembly.

CAUTION

The ground plate comes oﬀ along with the base plate ass'y, so be

careful not to lose it.

Fig. 036 The Position of the Base Plate Ass'y Screws

２） Bottom PCB Ass'y Removal

⑴Discharge at the “DIS-CHARGE” mark as shown in the ﬁgure.

CAUTION

Be sure to discharge the main capacitor after removing the base plate

ass'y.

  ⑵Unsolder the yellow and black lead wires.
  ⑶Remove the BOTTOM-MAIN FPC.
  ⑷Remove ﬁve FPCs.

Fig. 037 Discharging Position for Bottom PCB Ass'y

Discharging position

Fig. 038 Position of Bottom PCB Ass'y FPCs

BOTTOM-MAIN FPC

Summary of Contents for 40D - EOS 40D DSLR















































































































































































































Search results

Summary of Contents for 40D - EOS 40D DSLR

Reviews:

Related manuals for 40D - EOS 40D DSLR

Brands by name

Popular brands

Canon 40D - EOS 40D DSLR, Service Manual

Search results

Summary of Contents for 40D - EOS 40D DSLR

Reviews:

Related manuals for 40D - EOS 40D DSLR

Brands by name

Popular brands