Canon 40D - EOS 40D DSLR Service Manual Download Page 95

Page: 95 / 209

Repair Information

１） Right Side Cover Ass'y Disassembly (as necessary)

⑴Remove the ﬁtting and two screws, and pull oﬀ the strap right holder.

Fig. 068 Position of Strap Right Holder Screws

⑵ Remove three screws from the back and one screw from the front, and remove the right

side cover ass'y.

Fig. 069 Position of Right Side Cover Ass'y

Screws (Back)

Fig. 070 Position of Right Side Cover Ass'y

Screws (Front)

  ⑶Pull oﬀ the CF cover shaft vertically, and remove the CF slot cover.
  ⑷Remove the CF door FPC ass'y.
  ⑸Remove the battery cover FPC ass'y.

CAUTION

Be careful not to damage the CF door FPC ass'y and the battery cover

FPC ass'y.

Summary of Contents for 40D - EOS 40D DSLR















































































































































































































Search results

Summary of Contents for 40D - EOS 40D DSLR

Reviews:

Related manuals for 40D - EOS 40D DSLR

Brands by name

Popular brands

Canon 40D - EOS 40D DSLR, Service Manual

Search results

Summary of Contents for 40D - EOS 40D DSLR

Reviews:

Related manuals for 40D - EOS 40D DSLR

Brands by name

Popular brands