Canon 40D - EOS 40D DSLR, Service Manual

Page: 27 / 209

General Information
22
6-6 Magnification: Approx. 0.95x (with 50mm lens at infinity, -1 m
-1
(dpt))
6-7 Viewfinder
1) AF information
information:
AF points and focus confirmation light
2) Exposure information
Shutter speed, aperture, ISO speed ( Always displayed ), AE
lock, exposure level, spot metering circle, exposure warning
3) Flash information
Flash ready, flash exposure compensation, high-speed sync,
FE lock, red-eye reduction light
4) Image information
Monochrome shooting , maximum burst ( 2-digit display ),
white balance correction, CF card information
6-8 Mirror: Quick-return half mirror (Transmittance:reflectance ratio of
40:60)
6-9 Viewfinder blackout
Approx. 0.1 sec. at 1/60 sec. or faster speeds.
time:
6-10 Mirror lockup:
Enabled with C.Fn III-7-1
6-11 Mirror cut-off:
No mirror cut-off with lenses up to EF600mm f/4L IS USM
6-12 Depth-of-field Enabled with depth-of-field preview button
preview:
6-13 Eyepiece shutter: None (Eyepiece cover attached to strap)
6-14 Misc.:
Eyecup Ef provided
7．Live View Shooting
7-1 Type:
Electronic viewfinder with imaging sensor
7-2 Coverage: Approx. 100% vertically and horizontally
7-3 Frame rate: 30 fps
7-4 Focusing:
1) Manual focus
＊Magnify the image by 5x or 10x and focus manually.
2) Autofocus
＊ With C.FnIII-6, press the <AF-ON> button and the reflex mirror will go
back down (Live View shooting interrupted). The same phase difference as
during normal shooting is executed. After focus is achieved, let go of the
<AF-ON> button and Live View shooting will resume.
7-5 Metering:
Real-time evaluative metering with the imaging element
＊AE lock possible.
＊Metering range: EV 0 - EV 20 (At 23°C/73°F, 50mm f/1.4 lens, ISO 100)
＊The active metering time can be changed.
7-6 Exposure
Exposure compensation and AEB simulation possible
confirmation:
(C.Fn IV-7-1)
7-7 Depth-of-field
Possible with Depth-of-field preview button
preview:
7-8 Magnified view: Magnify by 5x or 10x at the AF point position
7-9 Grid display:
Two vertical and two horizontal lattice lines displayable