Canon 40D - EOS 40D DSLR Service Manual Download Page 88

Page: 88 / 209

Repair Information

１） Main PCB Ass'y Removal

⑴Unsolder at two places and remove the main PCB shield cover with tweezers.

CAUTION

Be careful not to damage the FPC at the back of the main PCB shield

cover when unsoldering.

⑵Unsolder at one place and remove the ground plate.

Fig. 049 Soldering Position for Main PCB

Shield Cover and Ground Plate

Main PCB

Shield Cover

Ground Plate

  ⑶Remove six FPCs.
  ⑷Disconnect one lead wire.
  ⑸ Remove ﬁve screws, and remove the main PCB ass'y while avoiding the metal ﬁttings of

the main body.

⑹Disconnect one lead wire (11pin).

Fig. 050 Position of Main PCB Ass'y FPC

and Connector

FPC

Connector

Fig. 051 Position of Main PCB Ass'y Screws

Summary of Contents for 40D - EOS 40D DSLR















































































































































































































Search results

Summary of Contents for 40D - EOS 40D DSLR

Reviews:

Related manuals for 40D - EOS 40D DSLR

Brands by name

Popular brands

Canon 40D - EOS 40D DSLR, Service Manual

Search results

Summary of Contents for 40D - EOS 40D DSLR

Reviews:

Related manuals for 40D - EOS 40D DSLR

Brands by name

Popular brands