Canon 40D - EOS 40D DSLR Service Manual Download Page 79

Page: 79 / 209

Repair Information

１） Top Cover Ass'y Removal

⑴ Disconnect the 2 lead wires that have connectors (yellow connector, red connector)

attached.

CAUTION

The lead wire (red connector) has a high voltage, so remove it using

plastic tweezers.

⑵Remove one FPC, remove the bond, and disconnect the fiber.

CAUTION

Be careful not to damage the ﬁber when disconnecting it.

Fig. 027 The Position of the Top Cover Ass'y

Lead Wire

Fig. 028 The Position of the Top Cover Ass'y

FPC and Fiber

Fiber

⑶ Remove two screws and diopter correction dial from the top of the top cover and two

screws from the bottom, and remove the top cover ass'y.

Fig. 029 The Position of the Top Cover Ass'y

Screw (Top)

Fig. 030 The Position of the Top Cover Ass'y

Screws (Bottom)

⑷Remove the display window. (as necessary)

diopter correction dial

Summary of Contents for 40D - EOS 40D DSLR















































































































































































































Search results

Summary of Contents for 40D - EOS 40D DSLR

Reviews:

Related manuals for 40D - EOS 40D DSLR

Brands by name

Popular brands

Canon 40D - EOS 40D DSLR, Service Manual

Search results

Summary of Contents for 40D - EOS 40D DSLR

Reviews:

Related manuals for 40D - EOS 40D DSLR

Brands by name

Popular brands