Canon 3807B007, User Manual

Page: 863 / 1044

Setting Item Description, Instructions
System
Setup
Detect Mismatch Specify printing behavior if the type and size of pa-
per specified in the printer menu does not match the
type and size in the printer driver.
Choose
Pause to have printing paused under these
circumstances. Choose Warning to continue printing
after notification. Choose None to continue printing
without notification.
Paper
Size
Basis Roll Selection 1 If roll size detection is activated, choose whether
ISO A3 (297mm) or 300mm Roll is applied when a
roll of an intermediate width is detected.
Roll Selection 2 If roll size detection is activated, choose whether
10in. (254mm) or JIS B4 (257mm) is applied when
a roll of an intermediate width is detected.
Keep Paper Size Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin set-
ting of the printer menu will be used instead of the
margin setting of the printer driver if the latter is
smaller, which may prevent text or images in the
margin from being printed.
Choose Off to give priority to margin settings. The
larger value is used if the margin specified in the
printer driver does not match the margin in the print-
er menu.
TrimEdge Reload Specify whether to trim the leading edge of the cur-
rently retracted roll when the roll is advanced. Cut
the edge if you are concerned about any marks left
on the roll when the roll is left in the retracted posi-
tion.
Specify
On to have rolls cut when printing begins af-
ter Sleep mode or when the power is restored. Select-
ing
Automatic will trim the edge when the roll has
been in the retracted position for two days or more.
Rep.P.head Print Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead.
(See " Automatic Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.) .")
→P.765
Printer Parts > Control Panel >
iPF6300 Menu Settings
8
845