Canature 105STS 90 -1.5", Installation, Operation & Service Instructions

Page: 22 / 94

Installation Section 4
Page 4 -6
105
Installing The Control Valve Section 4.4
-Note: Due to slight expansion and contraction of the media tanks, the piping must be
designed to all some movement as well as protection from vacuum, flex connectors and
a vacuum breakers may be required. Failure to install or improperly install them will void
the warranty. See drawing.
- If the interconnecting piping is rigid, such as when the piping is in copper, flex connectors
must be installed on all connections to control valve. A flex connection may also be required
on the drain line as well if the piping is rigid. The standard systems do not include flex
connectors but can be supplied as optional items with the system.
- A vacuum breaker is normally required on the inlet
of each media tank. The standard systems do not
include vacuum breakers but can be supplied as
optional items with the system.