Canature 105STS 90 -1.5", Installation, Operation & Service Instructions

Page: 20 / 94

Installation Section 4
Page 4 -4
105
105 Control Valve Section 4.4
- When ordered as a system, the control valve is already set up for the system with the
proper backwash flow controls, etc.
- The valve piping connections are shown below. See section 2 for standard connection sizes
for individual units.
- Inlet connection 1.5” or 2” MNPT
- Outlet connection is 1.5” or 2 “ MNPT and has the meter mounted internally. For more
information see section 10. Confirm
meter cable is properly inserted
into the meter pipe adapter.
- Drain connection is 1.5” or 2”
MNPT and for most units, has the
backwash flow controller mounted
internally.
- Brine line connection (also used
on a few specialized filters) is 3/4”
thread. When required, the valve is
supplied with a adapter to connect
to 3/8” or 1/2” tubing. NOTE: for units larger than 450,000 grains, the brine line piping is
3/4” or 1” pvc and is not supplied.