Canature 105STS 90 -1.5", Installation, Operation & Service Instructions

Page: 21 / 94

Installation Section 4
Page 4 -5
105
Installing The Control Valve Section 4.4
- Before mounting the control valve on top of the tank, it is recommended to fill the tanks
with water. This will give the media time to soak .
- Ensure the riser tube is 1/2” below the top of the tank.
-The riser tube top end must also be properly
chamfered to prevent damage to the riser tube o-ring
while sliding the control valve on.
- Confirm both the riser tube o-ring
and tank to valve o-ring are in place
and well lubricated using silicone
grease.
-The top portion of the 105 valve swivels on the bottom tank adapter base. Use a strap or
chain wrench on the bottom tank base only when tightening the valve on to the tank.