CAMSO 30D23MC, Service Manual

Page: 45 / 106

4 - 24D18C Drive Wheel Seal And Bearing Replacement
43
STEP 15
Remove the inner bearing cone (1) and the seal (2)
from the spindle.
NOTE: On models before TRE0216003 the bearing
cone is press fit. Use a bearing splitter / puller to
remove the bearing or cut the bearing off the spindle.
Both methods can damage the seal shoulder and it
must be replaced.
NOTE: On newer models remove the three plugs (3)
and install the three M14 pusher bolts, included with
the 2P-0080 Spindle Extraction Tool. Use the pusher
bolts to remove the bearing (1) and seal shoulder.
STEP 16
On older models, use a bearing splitter and puller to
remove the inner seal shoulder (1).
STEP 17
Remove the O-ring (1) from the inner seal shoulder.
Install a new O-r ing on the new 2C-3299-100
shoulder O-ring grove before installing the shoulder
in Step 18.
NOTE: Apply clear petroleum jelly to the O-ring (1)
to hold it in place during assembly.
cp1021
1
2
cp1714
3
cp0521
1
cp0524
1