CAMSO 30D23MC, Service Manual

Page: 12 / 106

1 - Track Removal And Installation
10
STEP 4
Install the drain hose (1) on the valve and direct it
into the catch container. Turn the tension valve knob
(2) counterclockwise slowly to open the valve.
cpo532
1
STEP 5
Place a floor jack (1) under the track and tension idler
wheel. Raise the floor jack slowly to compress the
tension cylinder (2). Close the tension valve.
cpo461
1
1
2
STEP 6
Raise the undercarriage until there is approximately
25 mm (1 inch) between the midroller wheels(1) and
the track. Remove both outside idler wheels (2).
NOTE: All four idler wheels (inner and outer) can be
removed to make it easier to remove the track.
cp1534
1 3
1
2
2
STEP 7
Raise the undercarriage until the drive lugs (1) will
clear the midroller wheels (2).
cp1532
1
2