CAMSO 30D23MC, Service Manual

Page: 53 / 106

4 - 24D18C Drive Wheel Seal And Bearing Replacement
51
STEP 37
Use a hoist and lifting strap (1) to position the drive
wheel on the mounting flange. Install the mounting
bolts and washers (2). Tighten the bolts to 540 to 660
N•m (400 to 485 ft-lb).
STEP 38
Follow the procedures in Steps 5, 6 and 7 of the
Undercarriage Removal And Installation Section of
this manual to install the undercarriage on the
machine.
On older models use the grease zerk (1) on the
tensioning valve manifold to add grease to the drive
wheel spindle seal installed in Step 20. Apply grease
until it is visible (2).
cp0508
1
2
cp1534
1
2