Campbell SkyVUE 8, Product Manual

Page: 57 / 116

Laser firing (yellow)
(
BS_AV_Time
) = 2 s 2 s
Measurement Period = 10 s 10 s 10 s 10 s
Message Interval = 30 s 30 s
In this case, with the rolling average set to 3 (default), the SkyVUE 8 sends a message every 30
seconds that contains the average of the latest three measurements. Therefore, each message is
based on three, 10 second measurement periods, with each containing 2 seconds of backscatter
average data.
Laser firing (yellow)
(
BS_AV_Time
) = 2 s 2 s
Measurement Period = 10 s 10 s 10 s 10 s
Message Interval = 30 s 30 s
In this case, with the rolling average set to 3 (default), the SkyVUE 8 sends a message every 10
seconds that contains the average of the latest three measurements. Therefore, each message is
based on three, 10 second measurement periods, with each containing 2 seconds of backscatter
average data.
Laser firing (yellow)
(
BS_AV_Time
) = 2 s 2 s
Measurement Period = 10 s 10 s 10 s 10 s
Message Interval = 10 s 10 s 10 s 10 s
In this case, the SkyVUE 8 sends a message every 14 seconds based on one measurement taking 4
seconds over a 14 second interval. Therefore, each message is based on a single 4 second period
of average data.
Laser firing (yellow)
(
BS_AV_Time
) = 4 s
Measurement Period = 14 s 14 s 14 s 14 s 14 s
Message Interval = 14 s 14 s 14 s 14 s 14 s
This message cannot be set up using the
MCFG
command alone.
The BS command has to be used as follows:
BS_Av_Time
(averaging period) has to be set to 4, not the default value.
SkyVUE™8 (CS136) LIDAR Ceilometer 45