Campbell SkyVUE 8, Product Manual

Page: 42 / 116

Table 5-1: Summary of the terminal mode commands available
Command
Parameter/
parameter block
Description
precipitation from being reported as low cloud.
0 = Filter Off
1 = Filter On (default). Reports the highest cloud
during precipitation
DEFAULTS
No parameters Loads factory defaults
GETUSER
Reads all user settings as a string of text. Parameters
are read in the following order:
user
= text user
volVer
= user volume version
OS_VER = DSP OS version
PsuOsVer
= PSU OS version
TopOsVer
= TOP OS version
Id
= SkyVUE 8 ID
Pw
= SkyVUE 8 password
terminalCrc = terminal crc mode
terminalTimeout
= terminal timeout
unitsTiltMode
= units and tilt mode
hoodHBMode = hood heater / fan heater mode
hoodHBTestInt
= hood heater / blower test
interval in hours
battBoost_mV = boost voltage used for battery
charging mV
battCharge_mA
= battery charge current mA
psuPresent = PSU present switch
hoodHBNormSpeed
= fan voltage for normal speed
mV
hoodHBHighSpeed = fan voltage for high speed
mV
SkyVUE™8 (CS136) LIDAR Ceilometer 30